Balance style and airflow with the Kolink Unity Meshbay ARGB PC Case. This ATX chassis has ample support for premium hardware, including NVIDIA RTX 40 Series GPUs and ATX motherboards. With four pre-installed ARGB/PWM fans and mesh panelling at the front, this PC case has outstanding out of the box cooling performance.

Kolink Unity Meshbay ARGB Mid Tower PC at a Glance: 

  • Mid-tower ATX PC case 
  • Focus on aesthetics: glass panelling and ARGB/PWM fans 
  • 400mm GPU clearance and support for vertical mounting (kit sold separately) 
  • Four pre-installed Kolink Umbra S ARGB/PWM 120mm fans with included fan controller 
  • Extensive support for radiators and water cooling 
  • Half PSU shroud for clean interior 


Unity Meshbay ARGB 

The Kolink Unity Meshbay Series cuts a fine figure on your desk. With a sleek, all-black chassis and mesh panelling, these PC cases balance style and cooling performance. There are two models available in the line-up, Performance and ARGB. This is the ARGB Edition, with a mesh front and sliding glass side panel, four pre-installed Kolink Umbra S ARGB/PWM 120mm fans, and an included fan controller. The ARGB Edition provides ample airflow and a vibrantly colourful aesthetic.  


Great Hardware Support


On top of its stylish good looks, the Kolink Unity Meshbay ARGB has comprehensive support for all your gaming hardware. The backplate can hold up to ATX motherboards, and there are seven expansion slots with two additional vertical ones. Thanks to this, you can mount your GPU vertically (kit sold separately), and there is even 400mm clearance for extensive compatibility with the current market.

To keep the interior looking clean, there is a half PSU shroud capable of holding ATX power supplies between 150mm and 180mm. For storage, there are four drive bays at your disposal, featuring two for 2.5" SSDs and two for 3.5" HDDs. 

Great Airflow


Between the mesh panels and pre-installed fans, the Kolink Unity Meshbay ARGB PC Case facilitates incredible natural airflow. Alternatively, you can take full advantage of the support for water-cooling components to craft a highly efficient thermal solution. 

The pre-installed 120mm fans are mounted to the front and rear panels, in clusters of three and one, respectively. Naturally, these panels can support additional fans or radiators. Both the top and front panel can host up to three 120mm/140mm fans, or radiators up to 360mm long. Upon the rear, there is a 120mm mount that can be used for either a fan or radiator. The PSU shroud supports three 120mm fans, but a radiator cannot be installed here. Instead, a 240mm radiator can be mounted on the side next to the motherboard backplate.

To complete the cooling component specifications, there is clearance for a 168mm tall CPU cooler. 

Finishing Touches 

Keeping the interior looking tidy, the Kolink Unity Meshbay ARGB has a dedicated 24mm deep space for routing cables. This is tucked behind the motherboard tray, helping to reduce airflow restriction in the main chamber, too.

The I/O is located on the top panel. It features two USB 3.0 and USB 2.0 ports, and an HD audio jack, along with power and reset buttons.


Download specification

Technical details


210 x 465 x 420 mm (W x H x D)

Weight: approx. 7.7 kg

Colour: Black

Material: Steel, ABS

Form factor: ATX, Micro-ATX, Mini-ITX


Fans possible:

Front: 3x 120 mm / 3x 140 mm

Top: 3x 120 / 3x 140 mm

PSU shroud: 3x 120 mm

Side: 3x 120 mm

Rear: 1x 120 mm



Front: 3x Kolink Umbra S ARGB/PWM 120 mm

Rear: 1x Kolink Umbra S ARGB/PWM 120 mm


Radiators possible:

Front: 360 / 240 / 120 mm

Top: 360 / 240 / 120 mm

Side: 240 / 120 mm

Rear: 120 mm



2x 3.5"

2x 2.5"


    I/O Panel:

    1x USB 2.0

    2x USB 3.0

    1x 3.5 mm HD Audio

    1x Power Button

    1x Reset Button

    PCIe slots: 7+2

    GPU Clearance: 400 mm

    CPU Cooler: Up to 168 mm

    PSU: max. 180 mm clearance